|
  |
ADJUSTABLE TYPE
SCORING SETS |
|
 |
| Application: Used on panel saws or sliding table saws with seperate scoring units for chip-free cuts on both sides of the material. Adjustable scoring sets consisit of two 12-tooth saw blades with shims to adjust the kerf width (2.8MM to 3.6MM) Used in combination with our industrial saw blades '6' series only.(example #614721, #616961, etc.). |
 |
| |
|
|
|
|
|
'B' Kerf Range |
'C' Plate |
|
|
| Tool No. |
Price |
|
'D' Dia. |
Teeth |
Grind |
MM |
Inches |
MM |
Inches |
Bore |
Machine Application |
| SS100T12 |
91.16 |
|
100MM |
12x2 |
ATB |
2.8-3.6MM |
.100-.142 |
2.0MM (x2) |
.078 (x2) |
20MM |
Helling |
| SS100T14 |
91.16 |
|
100MM |
12x2 |
ATB |
2.8-3.6MM |
.110-.142 |
2.0MM (x2) |
.078 (x2) |
*22MM |
Altendorf, Delta, Martin, Mrozek, Panhans |
| SS120T12 |
102.08 |
|
120MM |
12x2 |
ATB |
2.8-3.6MM |
.110-.142 |
2.0MM (x2) |
.078 (x2) |
20MM |
SCMI |
| SS120T14 |
102.08 |
|
120MM |
12x2 |
ATB |
2.8-3.6MM |
.110-.142 |
2.0MM (x2) |
.078 (x2) |
*22MM |
Altendorf, Martin, Mrozek |
| SS125T14 |
102.08 |
|
125MM |
12x2 |
ATB |
2.8-3.6MM |
.110-.142 |
2.0MM (x2) |
.078 (x2) |
20MM |
Griggio |
|
*Products shown in Bold indicate most popular items.
*Note:Adjustable scoring sets with 22MM bore can converted to either 3/4" bore by ordering two each #BU-130 bushings, or to 20MM bore by ordering two each #BU-140 bushings. Replacement 5-piece shim set (0.6MM, .10MM, .20MM (2) and 2.8MM) order no. 'Shim Set'. Will fit 20MM or 22MM scoring sets. |
© 2003 Amana Tool Corporation. All Rights Reserved
|
|
