|
  |
SAWS
RE-BORING SERVICES |
|
 |
For normal charge, most Amana Tool® Saw Blades, Scoring Saws and Dado Sets can be re-bored to fit special size arbors.
Example:If you needed a 12" 40 tooth TCG blade (#612401) re-bored to 30MM (Bore-M), order as follows: |
| Quantity |
Item # |
Description |
| 1 each |
612401 |
12" x 40T TCG |
| 1 each |
Bore-M |
Re-bore above #612401 to 30MM |
For special boring requests (pin-holes, keyways, etc.) please provide a detailed drawing showing bore specifications and arrangement. Example
Picture shown >
Blade
#DT305T481-30
Main Bore
30MM diameter
Pin-holes
10MM diameter each
Pin-holes location
30MM from center of main bore to center each pin-hole (60MM circle).
Delivery
Please allow 7-10 working days to process yur order.
Guarantee
Blades carry the same Amana Tool®quality guarantee. However, blades are not returnable once re bored exept for defects in material or workmanship. |
 |
| |
| Order # |
Bore Range |
| Bore |
-0- through 1-3/4" |
| Bore-1 |
Above 1-3/4" through 2" |
| Bore-2 |
Above 2" through 3" |
| Bore-M |
Metric sizes through 75MM |
| Bore-3 |
Dado sets (6pc.) through 1-3/4" (45MM) |
| *Bore |
Adjustable scoring sets through 30MM |
Larger sizes available on request. |
IMPORTANT NOTE:
*Due to the many different size scoring saw arbors on the market, please order carefully. For example: If you were to assume that the arbor hole needed was 1-3/16" (1.187") and it was actually 30MM (1.181"), the difference of only .006" (6/1000th of one inch) is enough that the blade would not fit onto the arbor properly. (1-3/16" is too large to fit on 30MM arbors and will have excessive vibration and run-out and will not run concentrically.) Conversely, if the arbor hole is too small, you could do damage to the arbor, blade & tensioning if you attempt to force the blade onto the arbor. |
Phone or Fax Your Order To CTSaw
Phone: (800) 404-1220 Fax: (203) 378-7346
(If you fax your order, please include your phone number)
|
*Products shown in Bold indicate most popular items.
|
© 2003 Amana Tool Corporation. All Rights Reserved
|
|