|
  |
INSERT SHAPER CUTTERS
DIAL TYPE INDEXABLE GROOVING HEAD |
|
 |
| Fully adjustable in 1/10MM (.004") increments from 4.0 to 7.5mm. Sizes are changed by simply unlocking and turning the adjusting collar, and then 'dialing-in' the desired width on the easy-to-read scale. All eight knives have four cutting edges each for long tool-life and economy. |
 |
| Tool No. |
Price |
|
D |
B |
t |
d |
Max RPM |
| 61330 |
578.70 |
|
130MM (5-1/8") |
4.0 to 7.5MM (5/32" to 19/64") |
20MM (25/32") |
1-1/4" |
10,200 |
 |
| Order No. |
Price |
|
Description |
Size |
Qty. Required |
| RCK-71 |
4.23 |
|
4-sided knife #1 |
14x14x1.2MM |
4 |
| RCK-18 |
8.58 |
|
4-sided knife #2 |
18x18x2.0MM |
4 |
| 67170 |
Call Us |
 |
Screw retainer #1 |
4.0x.5x10MM |
4 |
| 67172 |
Call Us |
|
Screw retainer #2 |
4.0x.5x12MM |
4 |
| 67160 |
Call Us |
|
Flat head knife retaining screws |
4x.5x3.0MM |
8 |
| 67164 |
Call Us |
|
Slotted collar locking screw |
5x.8x7.0MM |
1 |
| 5090 |
Call Us |
|
Torx® key |
#T-9 |
1 |
|
|
| Same as above #61330, but the kerf range is 8.0 to 15mm, or 12.5 to 24mm. |
|
| Tool No. |
Price |
|
D |
B |
t |
d |
Max RPM |
| 61340 |
465.21 |
|
160MM (6-5/16") |
8.0 to 15MM (5/16" to 19/32") |
30MM (1-3/16") |
1-1/4" |
8,200 |
| 61342 |
490.95 |
|
160MM (6-5/16") |
12.5 to 24MM (1/2" to 15/16") |
30MM (1-3/16") |
1-1/4" |
8,200 |
|
| Order No. |
Price |
|
Description |
Size |
Qty. Required |
| RCK-70 |
4.10 |
|
4-sided knife #1 |
14x14x2.0MM |
4 |
| AMA-17 |
4.13 |
|
2-sided knife #2 |
7.5x12x1.5MM |
4(61340 only) |
| AMA-12 |
2.67 |
|
4-sided knife #3 |
12x12x1.5MM |
4(61342 only) |
| 67162 |
Call Us |
|
Slotted head knife screws |
5x.8x5MM |
4 |
| 67166 |
0.77 |
|
Allen head set screws |
5x.8x16MM |
4 |
| WB-42 |
11.30 |
|
Wedge blocks for 7.5MM knives |
--- |
4 |
| WB-44 |
15.66 |
|
Wedge blocks for 15MM knives |
--- |
4 |
| 5007 |
Call Us |
|
'L' shaped hex key |
2.5MM |
1 |
*Products shown in
Blue
indicate Minimum order 10 each.
|
© 2003 Amana Tool Corporation. All Rights Reserved
|
|