|
  |
JOINERY BITS |
|
|
|
 |
| First piece is cut flat (horizontal) and the second is cut perpendicular (vertical) to the first for a perfect fit. There is no need to re-align the router depth, provided that the wood is centered to the cutting edge of the bit. Not recommended for use in a pin router nor a router table unless the length of your material can be handled easily. |
| Warning:Maximum RPM18!=18,000 |
 |
|
Tool No. |
D |
B |
a° |
d |
L |
Material Size |
Price |
|
|
55393 |
1-1/2 |
1/2 |
45° |
1/4 |
1-5/8 |
5/16-7/16 |
64.25 |
|
|
55391 |
1-5/8 |
5/8 |
45° |
1/4 |
1-3/4 |
3/8-1/2 |
67.60 |
|
|
55389 |
1-3/4 |
7/8 |
45° |
1/2 |
2-1/8 |
3/8-5/8 |
74.72 |
|
18! |
55390 |
2-11/16 |
1-3/16 |
45° |
1/2 |
2-5/8 |
1/2-7/8 |
105.04 |
|
| Tool No. |
D1 |
D2 |
B |
B1 |
d |
L |
Price |
|
| 55386 |
3/4 |
1/2 |
1/2 |
5/32 |
1/4 |
1-5/16 |
31.10 |
|
| 55387 |
1 |
23/32 |
1/2 |
5/32 |
1/2 |
1-5/16 |
33.44 |
|
 |
| Second piece is cut 'upside-down' to the first for a perfect fit. There is no need to realign the router depth, provided that the wood is centered to the cutting edge of the bit. For 5/8" through 1" material. |
 |
| Tool No. |
D1 |
D2 |
B |
d |
L |
Price |
|
| 55388 |
1-7/8 |
1-7/16 |
1-3/32 |
1/2 |
2-5/8 |
69.23 |
|
|
|
© 2003 Amana Tool Corporation. All Rights Reserved
|
|
