SLOTTING CUTTER BITS
With Ball Bearing Guide
The 'Quadraset' with its four cutters enables you to cut grooves and dados from 1/8" through *23/32" (3.2MM-18.0MM) in increments of 1/32" (0.1MM). Tongue & Groove can also be achieved with proper set-up. Fully diagrammed instructions included for both fractional and metric sizes. Complete with four cutters (1/8", 5/32", 3/16", 1/4"), arbor, ball bearing guide, spacers, and shims. For different depth of cut, see 'vari-depth bearings listed below.
Tool No.
D
A
B-Kerf
d1
d
L Price
 
53600
1-7/8
1/2
1/8-*23/32
5/16
1/2
3 70.88
53107Extra 5/32 two wing cutter only. (See below to purchase)
-
Order # Description
Price
  
53106 1/8" 2-Wing Cutter B1 11.83
53107 5/32" 2-Wing Cutter B2 12.06
53108 3/16" 2-Wing Cutter B3 12.06
53110 1/4" 2-Wing Cutter B4 12.58
47612 1/2" shank arbor with nut Call Us
47708 Ball bearing guide Call Us
55368 6.0MM spacers (3 required) Call Us
55404 0.5MM shims (4 required) Call Us
55357 0.1MM shims (10 required) Call Us
55402 1.0MM washers (5 required) Call Us


With Ball Bearing Guide
The new 'Duo-Set' features two 2-wing slotting cutters with shims for adjusting the kerf. Available in two size ranges. For different depth of cut.
Tool No.
D
B
A
d
L Price
 
53620
1-31/32
1/8-3/16
7/16
1/2
3 43.65
53640
1-31/32
3/16-11/32
7/16
1/2
3 49.89
 


Converts all standard Amana 1/2" depth of cut slotting assemblies to either 1/4" or 3/8" depth (including new 'Quadraset', Duo-set and box joint). High precision ball bearings fitted with non-marring Delrin® sleeves.
Tool No.
'C' Depth of Cut
I.D.
Bearing Size X
O.D. Price
 
47727
1/4
5/16
X
1-3/8 Call Us
47728
3/8
5/16
X
1-1/8 Call Us
Tool No. Description Price  
47729 Two piece set (47727/47728) Call Us


*5/32" size also used for 'biscuit-joint' cutting.

2 Wing Tool No. Price  
3 Wing Tool No.
Price  
B Kerf
D
d1 Bore
53100 11.18
53200
12.97
1/16
1-7/8
5/16
53102 11.18
53202
12.97
5/64
1-7/8
5/16
53104 11.83
53204
13.33
3/32
1-7/8
5/16
53106 11.83
53206
14.59
1/8
1-7/8
5/16
53107* 12.06
53207*
15.08
5/32
1-7/8
5/16
53108 12.06
53208
15.08
3/16
1-7/8
5/16
53110 12.58
53210
15.31
1/4
1-7/8
5/16


*5/32" size also used for 'biscuit-joint' cutting.

D
B
C
d
L
1-7/8
Kerf
1/2
1/4 or 1/2
2-3/8

   
1/4" Shank
1/2" Shank
B
2-Wing Tool No.
Price  
3-Wing Tool No.
Price
 
2-Wing Tool No.
Price   3-Wing Tool No. Price
 
1/16
53300
17.88 53400 18.98
53300-1
17.88 53400-1 18.98
5/64
53302
17.88 53402 19.21
53302-1
17.88 53402-1 19.21
3/32
53304
18.49 53404 19.37
53304-1
18.49 53404-1 19.37
1/8
53306
18.49 53406 20.61
53306-1
18.49 53406-1 20.61
5/32*
53307
18.79 53407 21.13
53307-1
18.79 53407-1 21.13
3/16
53308
18.79 53408 21.13
53308-1
18.79 53408-1 21.13
1/4
53310
19.11 53410 21.19
53310-1
19.11 53410-1 21.19

Replacement Arbors
Shank
Price
 
47600
1/4"
Call Us
47602
3/8"
Call Us
47604
1/2"
Call Us




Products shown in Bold indicate most popular items.
* A full 3/4" cut can be achieved using one additional #53107 cutter (available seperately).
Delrin® and Teflon® are registered trademarks of Dupont Co.

© 2003 Amana Tool Corporation. All Rights Reserved


Connecticut Saw & Tool
140 Avon Street, Stratford, CT 06615
Phone: (800) 404-1220 Fax: (203) 378-7346 EMail: Info@CTSaw.com