|
  |
JOINERY BITS |
|
|
|
 |
| 'Box Joint' set containing 3-wing slotting cutters and spacers for producing jewelry boxes, drawers, etc. Complete with cutters, spacers, arbor and ball bearing to achieve 1/2" depth of cut. Recommended stock thickness (height0: 3/4" though 1-5/8". For material over 1-5/8", two passes will accomplish joints up to 3". |
 |
| Tool No. |
D |
B |
B1 |
d |
L |
Price |
|
| 53610 |
1-7/8 |
1-3/8 |
5/32 |
1/2 |
3-3/4 |
|
|
| |
| Individual Components |
| Order # |
Description |
Price |
|
| 53207 |
5/32" 3-wing cutters (5 required) |
15.08 |
|
| 47620 |
1/2" shank arbor with nut |
Call Us |
|
| 47708 |
Steel ball bearing guide (1/2" depth of cut) |
Call Us |
|
| 55369 |
5.5MM spacers (4 required) |
Call Us |
|
| 55402 |
1.0MM spacers (2 required) |
Call Us |
|
| 55404 |
.5MM shim (1 required) |
Call Us |
|
 |
| Tongue is cut as shown in assembly 'A'. For groove cut, reassemble the tool as shown in 'B'. Instructions included. |
 |
| Tool No. |
D |
B |
C |
d |
L |
Price |
|
| 55400 |
1-5/8 |
3/4 |
3/8 |
1/2 |
3 |
53.72 |
|
| |
 |
| Can be used for T & G florring or other applications requiring a wedge pattern type. For 5/8" through 1-1/4" stock. Available individually or as a 2-piece set. |
 |
| Tool No. |
D1 |
D2 |
a° |
Description |
B |
B1 |
d |
L |
Price |
|
| 55410 |
1-1/4 |
9/16 |
15° |
Wedge groove |
1-1/4 |
1/4 |
1/2 |
2-3/4 |
56.32 |
|
| 55412 |
1-1/4 |
9/16 |
15° |
Wedge tongue |
1-1/4 |
7/16 |
1/2 |
2-3/4 |
64.32 |
|
| Tool No. |
D1 |
D2 |
a° |
Description |
Price |
|
|
|
|
|
| 55414 |
1-1/4 |
9/16 |
15° |
Complete Wedge T&G (2 piece set) |
113.52 |
|
|
 |
| 2-Wing With Ball Bearing Guide |
| With this assembly, you can cut one-finger through five-fingers in multiple passes. Both cuts are performed the same way; you simply turn over the counter-cut for a perfect fit (see diagrams). All cutters feature 'chipbreakers' behind each cutting tooth which limits the thickness of the chip, allowing for a safer cut. Assembly includes 5 individual finger cutters, 1/2" shank arbor, 1 straight cutter, ball bearing guide, shims, spacers, washers and complete illustrated instructions. Can be used on 7/16" (1-finger) through 1-3/8" stock (5-fingers). |
 |
| Tool No. |
D |
B |
d |
L |
Price |
|
| 55392 |
1-9/16 |
1-3/8 |
1/2 |
3-3/4 |
87.95 |
|
 |
| Order # |
Description |
Price |
|
| 55394 |
Finger cutter (5 required) |
16.84 |
|
| 55396 |
Straight cutter (1 required) |
16.84 |
|
| 47736 |
Ball bearing (5/6"x28MM) |
Call Us |
|
| 47620 |
1/2" Shank arbor with nut |
Call Us |
|
| 55367 |
3.4MM Spacers (7 required) |
Call Us |
|
| 55357 |
0.1MM Shims (10 required) |
Call Us |
|
| 55404 |
0.5MM Shims (1 required) |
Call Us |
|
| 55402 |
1.0MM Washers (2 required) |
Call Us |
|
|
|
© 2003 Amana Tool Corporation. All Rights Reserved
|
|
